Toro 48" (122 cm) Floating Deck Hydro Drive Twin-Lever (30488)

Call for Price

Key Features

Availability Brochure

MakeToro

Model48" (122 cm) Floating Deck Hydro Drive Twin-Lever (30488)

Product Features

Description

48" (122 cm) Floating Deck Hydro Drive Twin-Lever (30488)

18.5 hp Kawasaki® 603cc engine with 48" TURBO FORCE cutting deck, and Twin-Lever steering controls.

Highlights

48" (122 cm) TURBO FORCE 7-gauge cutting deck
18.5 hp* Kawasaki® 603cc
Robust 9-3/8" (23.8 cm) cast iron spindle housings
IntuitiveTwin Lever steering control system

Features

Twin Lever Controls-MD: Twin Lever steering controls reduce operator fatigue and increase productivity. The straight-forward control logic is easy for new operators to learn and master. Steers like a “z" mower. Great for tracking in large open spaces and also maneuvering around obstacles. All around an intuitive control system.

Specifications

Engine: 18.5 hp* Kawasaki® 603cc
Fuel Capacity: 5 gallons (19 L)
Cutting Width: 48" (122 cm)
Height of Cut: 1" to 4-1/2" (2.5 to 11.4 cm); quick change
Number of Blades: 3
Starter: Electric Start
Drive System: Hydraulic
Deck Material: 7-gauge Steel
Mulch, Bag, Side Discharge: Side-discharge Standard
Adjustable Discharge: Standard
Blade Engagement: Electric Clutch
Blade Tip Speed: 18,300+ ft/min (5,577 m/min)
CARB Compliant: Model 39488
Caster Tires: 9" x 3.50 - 4" (23 x 9 - 10 cm); flat-free
Certification: CARB
Deck Design: 48" (122 cm) 7-gauge TURBO FORCE
Discharge Chute: Reinforced rubber
Drive Tires: 16" x 7.50 - 8" (40.6 x 19.1 - 20.3 cm)
Ground Speed: 6.2 mph (10 km/h) fwd; 2.5 mph (4 km/h) rev
Height: 46" (117 cm)
Horsepower: 18.5 hp
Hydraulic Drive: Twin Hydro-Gear® Pumps
Hydraulic Fluid: Premium Synthetic
Length: 77.8" (197 cm)
Spindle Housing: 9-3/8" (23.8 cm) diameter cast iron
Steering Controls: Twin-Lever
Transmission: Hydro-Gear 10cc pumps and Parker motors
Width: 49.6" (126 cm) with chute up
Weight: 682 lbs (309 kg)

NOTES:

*The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.